Instructions and hardware for installation of radio equipment.
Instructions for Installation of Radio Sets AN/GRC-9 or SCR-694-C in Combination with Radio Sets AN/GRC-3 to 8, AN/VRQ-1 to 3, AN/VRC-8 to 10, AN/VRC-16 to 18, AN/PRC-8 to 10, or SCR-619 in Truck, 1/4 Ton, 4×4, Utility, M38 & M38A1 (Warning: 35 meg PDF file!)
Thanks go to Ken Perkins for the scans, and Wes Knettle for passing them along to me.
This page contains links to scanned images of a 1966 installation manual which describes the “correct” way to install radio set AN/VRC-12 in 2.5-ton 6×6 trucks. Each page was scanned at 150 DPI and saved as a GIF image. This is the complete manual; the original was unbound, and consisted of two double-sided sheets followed by five foldouts, 3-hole punched and stapled together without any cover. The scans were performed by Buzz KD7BZ, and then I touched them up and spliced together the foldouts. Buzz’s scans looked better before I converted them to 2-color images to make the files smaller… :-)
This page contains links to scanned images of a 1966 installation manual which describes the “correct” way to install radio set AN/GRC-106 in the M38A1 truck. Each page was scanned at 150 DPI and saved as a GIF image. This is the complete manual; the original was unbound, without any cover. The original was fairly blurry, so some pages are difficult to read.
This page contains links to scanned images of a 1967 installation manual which describes the “correct” way to install radio sets AN/VRC-46, AN/VRC-53, or AN/GRC-125 in the M37 truck. Each page was scanned at 150 DPI and saved as a GIF image. This is the complete manual; the original was unbound, and consisted of two double-sided sheets followed by five foldouts, 3-hole punched and stapled together without any cover.
SUBSCRIBE